BoilerFaultCodes.com

Intergas Xclusive Fault Codes

Combi Natural GasLPG 24-36 kW 2018-present
GC Numbers: 47-291-1347-291-1447-291-15

The fault code is already on your display

Note it down before pressing reset — resetting clears the code immediately. How to read fault codes →

Most common fault codes

F000
Your boiler has stopped working because an internal temperature sensor has failed and can no longer monitor the heating water.
Gas Safe engineer required · £90-160
F001
Your boiler has shut down because the water inside the heating system has become too hot and cannot circulate properly.
May be DIY safe · £120-350
F002
Your boiler has detected that the water temperature is getting too hot while you are trying to use your taps or shower, causing it to shut down for safety.
Gas Safe engineer required · £120-280

All 23 fault codes

Code Severity Plain English
F000 High Your boiler has stopped working because an internal temperature sensor has failed and can no longer monitor the heating water.
F001 High Your boiler has shut down because the water inside the heating system has become too hot and cannot circulate properly.
F002 High Your boiler has detected that the water temperature is getting too hot while you are trying to use your taps or shower, causing it to shut down for safety.
F003 High Your boiler has detected that the exhaust gases are getting too hot, so it has shut down as a safety precaution to prevent internal damage.
F004 High Your boiler is failing to light the gas flame required to provide heating and hot water.
F005 High Your boiler started to heat up but the flame went out unexpectedly, causing the system to stop working.
F006 High Your boiler thinks it sees a flame even when it hasn't started the burner yet, which is a safety conflict that prevents it from firing up.
F007 High Your boiler is failing to detect a flame after it tries to ignite, meaning it will not stay lit to provide heating or hot water.
F008 High Your boiler has switched itself off because the fan, which manages air and gas flow, is not spinning at the correct speed to operate safely.
F009 High Your boiler's main internal computer has developed a technical error and can no longer communicate with the burner safely.
F010 High Your boiler has detected a problem with one of its internal temperature sensors, which means it cannot accurately measure heat levels and has stopped working for safety.
F011 High Your boiler has detected a problem with one of its internal temperature sensors, which means it cannot accurately measure heat levels and has stopped working for safety.
F012 High Your boiler has detected an issue with a temperature sensor that is preventing it from heating your home or water safely.
f014 High Your boiler has detected that a temperature sensor is not correctly attached to the internal pipework, preventing it from monitoring heat levels safely.
f015 High Your boiler has detected that a temperature sensor is not properly attached or is incorrectly mounted, preventing the system from heating up safely.
f016 High Your boiler has detected an internal communication error or a connection issue with a thermal sensor, causing it to shut down for safety.
F018 High Your boiler is struggling to breathe because the pipes that take exhaust gases away or bring fresh air in are restricted or blocked.
F019 High Your boiler has detected an internal communication error between its main control boards, meaning it cannot operate safely and has shut down.
F027 Medium Your boiler is having trouble reading the outside temperature because the sensor or its wiring has developed an electrical fault.
f028 Medium Your boiler's internal computer has become confused after several reset attempts and has locked itself out for safety.
f029 High Your boiler is unable to control the gas supply correctly, which has caused it to shut down for safety.
F030 High Your boiler has stopped working because a internal sensor that monitors the temperature of the flue or hot water system has developed a fault.
F031 High Your boiler has stopped working because one of its internal heat sensors is reporting a technical error or has failed.

Protect yourself from future repair bills

Monthly cover means no unexpected bills when your boiler breaks down.

Top rated
OpenFix
Boiler & heating care plans
Get a quote →
Hometree
from £12.95/month
Get a quote →
HomeServe
from £8.00/month
Get a quote →

Affiliate links — we may earn a commission at no extra cost to you.