Table Row 6 High

Biasi Table Row 6 Fault Code

Also written as TABLEROW6 — same fault.

The Biasi Table Row 6 fault code means: your boiler has stopped working because the water pressure is too low for the system to run safely.. It appears on 1 Biasi model in our database.

Call an engineer soon

Book a Gas Safe engineer within 24 to 48 hours. Your boiler may be unsafe or could break down completely if left.

Technical description: Faulty primary circuit (no water or low c.h. pressure)
Typical repair cost £0-160 (including labour)

DIY fix possible

Locate the filling loop (usually a silver braided hose with small valves) underneath the boiler.Slowly open the valve(s) until you hear water flowing and watch the pressure gauge increase.Close the valves tightly once the needle reaches between 1.0 and 1.5 bar.

Find a Gas Safe engineer

Search the official register for a qualified engineer in your area.

Gas Safe Register →

Biasi models that show the Table Row 6 fault code

Click a model for the full fault code list and model-specific repair notes.

Source

Biasi Table Row 6 fault code information on this page is sourced and cross-checked against the official Biasi service / installation manuals for each affected model.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026