How much does it cost to fix Biasi error code Table Row 7?

Typical repair cost for the Biasi Table Row 7 fault is £120-£350 including labour.

Table Row 7 High

Biasi Table Row 7 Fault Code

Q: What does the Biasi Table Row 7 fault code mean?

Your boiler has stopped working because water is not moving around the system properly, which has caused it to shut down to prevent overheating.

Also written as TABLEROW7 — same fault.

The Biasi Table Row 7 fault code means: your boiler has stopped working because water is not moving around the system properly, which has caused it to shut down to prevent overheating.. It appears on 1 Biasi model in our database.

Technical description: Faulty primary circuit (absence of flow)

Typical repair cost £120-£350 (including labour)

DIY fix possible

Check that the boiler pressure is between 1 and 1.5 bar on the pressure gauge.Ensure all radiator valves and isolation valves under the boiler are fully open.Gently bleed your radiators to remove any trapped air that might be blocking flow.Reset the boiler by turning the control knob to 'R' for a few seconds.

Find a Gas Safe engineer

Search the official register for a qualified engineer in your area.

Gas Safe Register →

Biasi models that show the Table Row 7 fault code

Click a model for the full fault code list and model-specific repair notes.

Riva Plus M96.24SM Repair: £120-£350

Source

Biasi Table Row 7 fault code information on this page is sourced and cross-checked against the official Biasi service / installation manuals for each affected model.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026