14 fault codes with plain-English explanations, severity ratings, DIY guidance, and repair cost estimates.
The fault code is already on your display
Note it down before pressing reset — resetting clears the code immediately. How to read fault codes →
The GC number on your boiler's data badge identifies the exact appliance and production years, as recorded in the UK Product Characteristics Database.
| GC number | Appliance (register name) | Produced |
|---|---|---|
| 41-980-12 | Centora Green System 24 | 2002–2007 |
Appliance names and production years are taken from the UK Product Characteristics Database (the SAP/SEDBUK register). Where a GC number is also printed in this model's own manufacturer manual, both sources were checked to agree.
Tap any card for details
Your boiler has detected that it is running too hot and has automatically shut down for safety to prevent damage.
Your boiler is trying to start but cannot sense the flame required to heat your water or radiators.
Your boiler has detected that the temperature is low enough to risk freezing and has automatically started its pump to keep water moving and protect the system.
Your boiler has detected that the temperature inside is very low, so it has automatically started to prevent the water from freezing.
Your boiler has detected that water is not flowing around your heating system properly, so it has shut down to prevent itself from overheating.
Your boiler has stopped working because the water pressure inside the heating system has dropped too low to operate safely.
Your boiler has stopped working because a sensor that measures the water temperature for your radiators has likely disconnected or broken.
Your boiler's temperature sensor is failing to provide a reading, so it has shut down to prevent overheating.
Your boiler is struggling to stay lit and is automatically trying to restart itself after losing the flame.
Your boiler has detected an issue with the internal electrical connections that is preventing it from operating correctly.
Your boiler has stopped working because the internal fan that clears waste gases is spinning too slowly or has stopped completely.
Your boiler has detected an issue with the internal fan that moves air and exhaust gases, causing it to shut down for safety reasons.
Your boiler's internal computer is having trouble talking to the control panel, which is preventing the system from operating normally.
Your boiler's electronic brain is unable to communicate with its internal controls, causing the system to stop working entirely.
BoilerFaultCodes