14 fault codes with plain-English explanations, severity ratings, DIY guidance, and repair cost estimates.
Replaced by: Chaffoteaux PIGMA System
The fault code is already on your display
Note it down before pressing reset — resetting clears the code immediately. How to read fault codes →
The GC number on your boiler's data badge identifies the exact appliance and production years, as recorded in the UK Product Characteristics Database.
| GC number | Appliance (register name) | Produced |
|---|---|---|
| 41-980-31 | Centora Green System 30 | 2002–2007 |
Appliance names and production years are taken from the UK Product Characteristics Database (the SAP/SEDBUK register). Where a GC number is also printed in this model's own manufacturer manual, both sources were checked to agree.
Tap any card for details
Your boiler has detected that it is getting too hot and has automatically shut itself down to prevent any damage or safety risks.
Your boiler is failing to light the internal flame needed to heat your home's water.
Your boiler has detected that the temperature is low and has automatically switched on its internal pump to keep the water moving and prevent pipes from freezing.
Your boiler has detected that the temperature is very low and has automatically activated its internal heating system to prevent the internal pipes from freezing.
Your boiler is struggling to move water through its heating system, which means it cannot heat your home safely.
Your boiler has detected that there is not enough water inside the heating system to operate safely.
Your boiler has stopped heating your home because a sensor that measures the water temperature has disconnected or failed.
Your boiler's temperature sensor is failing to provide a reading, so the system has shut down as a precaution to prevent overheating.
Your boiler is struggling to stay lit and is repeatedly trying to restart itself, which will eventually lead to a complete lockout.
Your boiler's electronic control board is struggling to communicate with internal components due to a faulty electrical connection or damaged wiring.
Your boiler has detected that the internal air extraction system is not running fast enough to vent fumes safely, so it has turned itself off to prevent a risk.
Your boiler has detected an issue with the internal ventilation system, which prevents it from safely venting exhaust gases and means the unit will not start.
Your boiler's internal control panel is failing to talk to the main computer, which prevents the unit from starting safely.
Your boiler's internal computer is struggling to talk to its main control board, which means the system has stopped working as a safety precaution.
BoilerFaultCodes