E 08 High

Chaffoteaux E 08 Fault Code

Also written as E08 — same fault.

The Chaffoteaux E 08 fault code means: your boiler has detected that the water pressure inside the heating system is too low to operate safely.. It appears on 1 Chaffoteaux model in our database.

Call an engineer soon

Book a Gas Safe engineer within 24 to 48 hours. Your boiler may be unsafe or could break down completely if left.

Technical description: No water in the primary circuit
Typical repair cost £80-150 (including labour)

DIY fix possible

Locate the filling loop, which is usually a silver braided hose under the boiler connected to two valves.Open the valves slowly to allow water to enter the system until the pressure gauge reads between 1.0 and 1.5 bar.Close the valves firmly and check to ensure the pressure is stable.

Find a Gas Safe engineer

Search the official register for a qualified engineer in your area.

Gas Safe Register →

Chaffoteaux models that show the E 08 fault code

Click a model for the full fault code list and model-specific repair notes.

Source

Chaffoteaux E 08 fault code information on this page is sourced and cross-checked against the official Chaffoteaux service / installation manuals for each affected model.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026