How much does it cost to fix Ferroli error code LED2 on?

Typical repair cost for the Ferroli LED2 on fault is £100-280 including labour.

LED2 on High

Ferroli LED2 on Fault Code

Q: What does the Ferroli LED2 on fault code mean?

Your boiler has entered a safety lockout mode because it either failed to light properly or it has detected that the system is getting too hot.

Also written as LED2ON — same fault.

The Ferroli LED2 on fault code means: your boiler has entered a safety lockout mode because it either failed to light properly or it has detected that the system is getting too hot.. It appears on 2 Ferroli models in our database.

Technical description: Boiler shut down warning / Lockout (e.g. safety thermostat activated or ignition failure)

Typical repair cost £100-280 (including labour)

DIY fix possible

Check that your gas supply is turned on and you have credit on your meter.Locate the selector switch and turn it to the 'R' (Reset) position for several seconds, then back to 'On'.Ensure your radiator valves are open and the system pressure is between 1 and 1.5 bar.

Find a Gas Safe engineer

Search the official register for a qualified engineer in your area.

Gas Safe Register →

Ferroli models that show the LED2 on fault code

Click a model for the full fault code list and model-specific repair notes.

Source

Ferroli LED2 on fault code information on this page is sourced and cross-checked against the official Ferroli service / installation manuals for each affected model.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026