How much does it cost to fix Ferroli error code Low system water pressure?

Typical repair cost for the Ferroli Low system water pressure fault is £0-£90 including labour.

Low system water pressure High

Ferroli Low system water pressure Fault Code

Q: What does the Ferroli Low system water pressure fault code mean?

Your boiler has stopped working because the amount of water inside your heating system has dropped below the required level.

Also written as LOWSYSTEMWATERPRESSURE — same fault.

The Ferroli Low system water pressure fault code means: your boiler has stopped working because the amount of water inside your heating system has dropped below the required level.. It appears on 1 Ferroli model in our database.

Technical description: System empty

Typical repair cost £0-£90 (including labour)

DIY fix possible

Locate the external filling loop, which is a silver braided hose with one or two small valves connecting your cold water main to your heating pipes.Open the valve(s) slowly and watch the pressure gauge on the front of the boiler until the needle reaches the green zone, typically between 1.0 and 1.5 bar.Close the valve(s) tightly to prevent over-pressurizing the system.

Find a Gas Safe engineer

Search the official register for a qualified engineer in your area.

Gas Safe Register →

Ferroli models that show the Low system water pressure fault code

Click a model for the full fault code list and model-specific repair notes.

Econcept 100 Repair: £0-£90

Source

Ferroli Low system water pressure fault code information on this page is sourced and cross-checked against the official Ferroli service / installation manuals for each affected model.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026