Ferroli Pro RRT 24S Fault codes & diagnostics

Your boiler is unable to safely vent exhaust gases because the internal fan that pushes air through the system has stopped working correctly.

Your boiler is attempting to start but failing to light the burner, meaning it cannot produce heat or hot water.

Your boiler has detected that the exhaust gases leaving the unit are getting too hot, so it has shut itself down to prevent damage to internal parts.

Your boiler has detected that the water inside it has become dangerously hot and has shut itself down to prevent damage.

Your boiler has detected that it is getting dangerously hot and has shut itself down to prevent damage.

Your boiler is failing to detect the flow of water through the system, which means it cannot safely start up to provide you with heating or hot water.

Your boiler is having trouble 'reading' the temperature of the water returning to it, so it has stopped working as a safety precaution to prevent overheating.

Your boiler has detected an issue with the sensor that monitors the temperature of the gases leaving your flue, causing it to shut down for safety.

Your boiler's computer brain has become confused by its own internal settings and is unable to operate correctly.

Your boiler's internal computer has encountered a settings error and cannot function correctly until it is reprogrammed or replaced.

Your boiler's internal computer has encountered a configuration error and cannot communicate correctly with its sensors.

Your boiler has detected that the water temperature is rising too quickly or is not being correctly moderated, causing it to shut down for safety.

Your boiler's internal computer is experiencing a communication or hardware error, which has caused it to stop working for your safety.

Your boiler's main control computer is experiencing a software or hardware error, which prevents it from operating correctly.

Your boiler's internal computer is struggling to correctly adjust its gas and air mixture to ensure it burns fuel efficiently.

Your boiler's main internal computer is failing to communicate properly, which has forced the system to shut down to prevent further damage.

Your boiler has stopped working because the internal control board and the gas valve are no longer communicating with each other.

Your boiler’s main computer chip is experiencing an internal error, preventing the system from monitoring or controlling your heating properly.

Your boiler has been manually reset too many times in a short period and has now locked itself out for safety.

Your boiler's internal computer is struggling to read its configuration settings, which has caused it to stop working for your safety.

Your boiler has detected that the exhaust gases leaving the system are getting too hot, so it has shut down to prevent potential damage or overheating.

Your boiler has detected that it is running too hot and has automatically shut itself down to prevent any damage or safety issues.

Your boiler has detected that the water inside it is getting too hot and has automatically shut down to prevent damage or potential overheating.

Your boiler is struggling to detect the flow of water through the system, which means it has stopped providing heating and hot water to protect itself.

Your boiler is unable to read the temperature of the water returning to it, so it has safely shut down to prevent overheating.

Your boiler has detected an issue with the sensor that monitors the temperature of the gases leaving your flue, causing it to shut down for safety reasons.

Your boiler has detected that the exhaust gases leaving the system are getting too hot, so it has shut itself down to prevent damage.

Your boiler's computer has detected a configuration error and has safely shut itself down to prevent damage.

Your boiler's internal computer is experiencing a software or configuration error that is preventing it from operating correctly.

The internal computer in your boiler has identified an error in its configuration settings, causing it to stop运行 safely.

Your boiler is receiving an insufficient amount of electricity to operate safely and effectively.

Your boiler has stopped working because the water pressure inside your heating system has dropped too low to operate safely.

The boiler's internal computer has encountered a memory error or configuration mistake that prevents it from starting up correctly.

Your boiler has detected that water is heating up too quickly compared to the sensors' expectations, causing it to shut down to prevent damage.

Your boiler has detected an inconsistent temperature reading between its internal sensors, which has caused it to stop working as a safety precaution to prevent overheating.

Your boiler has detected that the heat exchanger is getting too hot, so it has purposefully shut down to prevent internal damage.

Your boiler's computer system has detected an error in its internal settings, causing it to stop operating to prevent further issues.

Your boiler's internal computer is experiencing a software or configuration error that is preventing it from operating correctly.

Your boiler is having trouble managing its internal combustion settings, which means the system cannot guarantee safe or efficient operation and has shut down.

Your boiler is having trouble controlling the balance of gas and air needed for a steady flame and has shut down as a safety precaution.

Your boiler has lost the correct settings for its internal combustion process and needs to be professionally reconfigured to run safely and efficiently.

Your boiler's internal electronic control center is experiencing a critical communication error and cannot safely operate the heating system.

Your boiler's internal computer has failed to start up correctly, which means it cannot operate your heating or hot water systèmes.

Your boiler's internal computer is failing to communicate correctly with its memory chip, which prevents the system from starting up safely.