Glow-worm Hideaway 50BFF Fault codes & diagnostics

4 fault codes with plain-English explanations, severity ratings, DIY guidance, and repair cost estimates.

Regular Gas 2002 onwards Discontinued
GC Number 41-047-33
Download the Glow-worm Hideaway 50BFF manualThe official installation and service manual (PDF), the document these fault codes were read from. PDF

The fault code is already on your display

Note it down before pressing reset — resetting clears the code immediately. How to read fault codes →

Which version do you have?

The GC number on your boiler's data badge identifies the exact appliance and production years, as recorded in the UK Product Characteristics Database.

GC number Appliance (register name) Produced
41-047-33 Hideaway 50BFF 2002–present

Appliance names and production years are taken from the UK Product Characteristics Database (the SAP/SEDBUK register). Where a GC number is also printed in this model's own manufacturer manual, both sources were checked to agree.

All 4 documented codes

Tap any card for details

NEON5

Your boiler has switched itself off because it has detected that the water inside has become dangerously hot.

High DIY-safe £90-220

What to check first

  1. Wait for the boiler to cool down completely (at least 20-30 minutes).
  2. Locate the reset button, typically found behind the small drop-down door or on the underside of the boiler.
  3. Press the reset button firmly; if the neon light goes out and the boiler restarts, monitor it closely.
  4. Ensure all radiator valves are open and the pump is running to prevent it happening again.

Parts commonly replaced

  • Overheat Thermostat
  • Circulation Pump
  • Thermistor

Related codes

Neon6

Your boiler has stopped working because it failed to light or stay lit when it was supposed to.

High DIY-safe £120-280

What to check first

  1. Turn the temperature control knob to the 'Off' position
  2. Wait for at least 30 seconds for the unit to reset
  3. Turn the temperature control knob back to your desired setting
  4. Ensure there is gas reaching the property (check other gas appliances)

Parts commonly replaced

  • Ignition electrode
  • Gas valve
  • Flame sensing probe
  • PCB

Related codes

Reset neon

Your boiler has safety-tripped and needs a manual restart to clear a temporary glitch or overheating issue.

High DIY-safe £0-120

What to check first

  1. Turn the boiler temperature control knob to '0' (the off position).
  2. Wait for at least 30 seconds for the internal components to reset.
  3. Turn the knob back to your desired temperature setting and follow standard lighting procedures.

Parts commonly replaced

  • Overheat Thermostat
  • Thermocouple
  • Fan
Reset neon lights

Your boiler has safety-tripped and simply needs a manual restart to try and fire up again.

High DIY-safe £0-120

What to check first

  1. Turn the boiler temperature control knob to the '0' position.
  2. Wait for at least 30 seconds.
  3. Turn the control knob back to your desired temperature setting to restart the ignition sequence.

Parts commonly replaced

  • Overheat Thermostat
  • Ignition Electrode
  • Gas Valve

4 operating states & engineer diagnostics

Not faults — these are normal operating states. Tap to expand.