Amber neon lit High

Grant Amber neon lit Fault Code

Also written as AMBERNEONLIT — same fault.

The Grant Amber neon lit fault code means: your boiler has stopped working because the water pressure inside the system has dropped below the required level.. It appears on 1 Grant model in our database.

Call an engineer soon

Book a Gas Safe engineer within 24 to 48 hours. Your boiler may be unsafe or could break down completely if left.

Technical description: Low pressure cut-out activated
Typical repair cost £0-£120 (including labour)

DIY fix possible

Locate the external filling loop, usually two silver flexible hoses connected to the pipework under the boiler.Open the valves on the loops slowly until you hear water entering the system.Watch the pressure gauge on the front of the boiler and close the valves once the needle reaches the green zone, typically between 1 and 1.5 bar.

Find a Gas Safe engineer

Search the official register for a qualified engineer in your area.

Gas Safe Register →

Grant models that show the Amber neon lit fault code

Click a model for the full fault code list and model-specific repair notes.

Source

Grant Amber neon lit fault code information on this page is sourced and cross-checked against the official Grant service / installation manuals for each affected model.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026