How much does it cost to fix Ravenheat error code E06?

Typical repair cost for the Ravenheat E06 fault is £90-180 including labour.

E06 High

Ravenheat E06 Fault Code

Q: What does the Ravenheat E06 fault code mean?

Your boiler has detected that the water temperature in your heating system is getting too high, causing it to shut down for safety.

The Ravenheat E06 fault code means: your boiler has detected that the water temperature in your heating system is getting too high, causing it to shut down for safety.. It appears on 9 Ravenheat models in our database.

Technical description: Central heating (CH) sensor is overheating

What causes the Ravenheat E06 fault?

This fault occurs when the water inside the boiler is unable to move away from the heat exchanger quickly enough, leading to a rapid rise in temperature. The most common reason is either a failing circulation pump that isn't pushing the water through the system or a faulty temperature sensor that is sending incorrect readings to the boiler's computer.

This issue often comes to light during the first cold spell of autumn, when the pump has been sitting idle all summer and becomes seized upon restart.

Typical repair cost £90-180 (including labour)

DIY fix possible

Check that all radiator valves are fully openEnsure the boiler pressure is between 1.0 and 1.5 barCheck if any bypass valves are closedReset the boiler to see if the fault clears

Find a Gas Safe engineer

Search the official register for a qualified engineer in your area.

Gas Safe Register →

Ravenheat models that show the E06 fault code

Click a model for the full fault code list and model-specific repair notes.

Source

Ravenheat E06 fault code information on this page is sourced and cross-checked against the official Ravenheat service / installation manuals for each affected model.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026