A2:1 Low

Viessmann A2:1 Fault Code

Also written as A21 — same fault.

The Viessmann A2:1 fault code means: your boiler is temporarily prioritizing the heating of your hot water over your radiators, meaning your heating may feel cool for a short period while the water tank refills.. It appears on 5 Viessmann models in our database.

Monitor it

This is a minor fault. Keep an eye on it and mention it at your next annual boiler service. Reset the boiler and see if it clears.

Technical description: With DHW priority applicable to mixer: The mixer is closed whilst DHW is loaded; the heating circuit pump operates

What causes the Viessmann A2:1 fault?

This status occurs because your boiler is designed to prioritise heating your hot water tank over your radiators. It physically closes a mixing valve to direct all available heat to your water cylinder, ensuring you have a full tank of hot water as quickly as possible. Once the water tank reaches its target temperature, the boiler will automatically switch back to heating your home.

DIY fix possible

Wait up to 30 minutes for the hot water cylinder to reach its target temperatureCheck if the hot water demand setting on your control panel is set unusually highMonitor the radiators to see if they begin to heat up once the hot water light goes off

Find a Gas Safe engineer

Search the official register for a qualified engineer in your area.

Gas Safe Register →

Viessmann models that show the A2:1 fault code

Click a model for the full fault code list and model-specific repair notes.

Source

Viessmann A2:1 fault code information on this page is sourced and cross-checked against the official Viessmann service / installation manuals for each affected model.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026