High
F2 on Viessmann Vitodens 100-W B1HC-19

Your boiler has temporarily shut down because it got too hot, which usually happens if there is trapped air in the system or the water pressure is too low.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed

Call an engineer soon

Book a Gas Safe engineer within 24 to 48 hours. Your boiler may be unsafe or could break down completely if left.

What the manual says

Manufacturer manual

Burner in a fault state, Temperature limiter has responded., Check heating system fill level. Check circulation pump. Vent the system. Check the temperature limiter and connecting leads (see page 55). Press "Reset" (see page 50).

From this model's manual
Verified against the Viessmann/Viessmann Vitodens 100 W B1hc B1kc 19 35 installation & service manual.
Plain-English guidance below. Severity, DIY steps, costs and parts are our interpretation to help you act, not text from the manual.

Engineer required

This is a high severity fault. Stop using the boiler and call a Gas Safe registered engineer. Do not attempt gas-related repairs yourself.

Find a Gas Safe engineer
Search the official register →
Boiler cover options

Avoid the next call-out bill

A cover plan would handle faults like F2: no call-out fees, no surprise bills.

Approved partner
Domestic Appliance Guard
Unlimited call-outs, 24/7 helpline, no price-hike promise
Get a quote →

Affiliate links. We may earn a commission at no extra cost to you.

Related fault codes

F4View →F5View →F3View →

All 29 fault codes on the Vitodens 100-W B1HC-19

Seeing a different code? Every code this model can display, in one place.

0C5A101830385051525859A3A9b0b7b8E3E5F0F1F3F4F8F9FAFCFdFF

Related guides you might find useful

How to bleed a radiator

Quarter turn on the valve, wait for water, then check the boiler pressure.

Read →

What pressure should my boiler be?

1 to 1.5 bar when cold on most UK boilers, from the manuals.

Read →

Boiler keeps losing pressure

Six most common causes of dropping pressure.

Read →