Medium
bE on Viessmann Vitodens 200-W WB2C 30kW Combi

The boiler has lost contact with the thermostat controlling one of your heating zones, so that zone may not heat as it should, but the rest of your heating and hot water should still work.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed

Book a service

This fault should be looked at by a Gas Safe engineer within the next week or two. It may get worse if left.

What the manual says

Manufacturer manual

Communication error, remote control Vitotrol heating circuit 3 (with mixer)

From this model's manual
Verified against the Viessmann/Viessmann Vitodens 200 W Wb2c Service 5692857 installation & service manual.
Plain-English guidance below. Severity, DIY steps, costs and parts are our interpretation to help you act, not text from the manual.

Engineer required

This fault requires a Gas Safe registered engineer. Do not attempt gas-related repairs yourself.

Find a Gas Safe engineer
Search the official register →
Boiler cover options

Avoid the next call-out bill

A cover plan would handle faults like bE: no call-out fees, no surprise bills.

Approved partner
Domestic Appliance Guard
Unlimited call-outs, 24/7 helpline, no price-hike promise
Get a quote →

Affiliate links. We may earn a commission at no extra cost to you.

Related fault codes

bdView →bCView →

All 82 fault codes on the Vitodens 200-W WB2C 30kW Combi

Seeing a different code? Every code this model can display, in one place.

4C9A9b9C9E9F1018202830384044485051585990919293949899A7b0b1b5b7b8bAbbbCbdbFC1C2C3C4C5C6C7C8CdCECFd6d7d8dAdbdCdddEdFE0E1E3E4E5E7E8EAEbECEdEEEFF0F1F2F3F8F9FAFCFdFEFF

Related guides you might find useful

Radiator not heating up

One cold radiator is usually a stuck valve pin or trapped air.

Read →

Hot water works but heating does not

On a combi it is usually the diverter valve. On a system boiler, the motorised valve.

Read →

Thermostat not working

Change the batteries first, even if the screen still works.

Read →