BoilerFaultCodesVokera 60 Fault Code
The Vokera 60 fault code means: your boiler is experiencing a temporary communication error or a sensor timing issue that is causing it to pause current operations.. It appears on 3 Vokera models in our database.
Technical description: Temporary fault code (Refer to section 7.10)
What causes the Vokera 60 fault?
This fault typically occurs when the main control board loses communication with the internal temperature sensors or when those sensors report conflicting data. It acts as a temporary pause while the boiler tries to verify that the readings are accurate and safe for operation. The most common reason is a degrading sensor (NTC thermistor) that is beginning to send inconsistent electrical signals to the brain of the boiler.
DIY fix possible
Press the reset button on the front control panelTurn the selector switch to the 'OFF/RESET' position and then back to 'ON'Monitor the boiler to see if the error code clears and operation resumes
Find a Gas Safe engineer
Search the official register for a qualified engineer in your area.
Gas Safe Register →Vokera models that show the 60 fault code
Click a model for the full fault code list and model-specific repair notes.
Source
Vokera 60 fault code information on this page is sourced and cross-checked against the official Vokera service / installation manuals for each affected model.
Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026