Green | On every 0.5 second Low

Vokera Green | On every 0.5 second Fault Code

Also written as GREENONEVERY05SECOND — same fault.

The Vokera Green | On every 0.5 second fault code means: your boiler has paused temporarily because it is waiting for a part to cool down or for a system sensor to detect the correct reading before restarting.. It appears on 1 Vokera model in our database.

Monitor it

This is a minor fault. Keep an eye on it and mention it at your next annual boiler service. Reset the boiler and see if it clears.

Technical description: Temporary fault

What causes the Vokera Green | On every 0.5 second fault?

This status occurs when the boiler's internal computer notices a temporary reading that is outside of the normal operating range, such as the water getting too hot too quickly. It physically pauses the burner to allow the internal components to cool down or for the system pressure to stabilise before it attempts to fire up again. The most common reason is a slight restriction in water flow or a temperature sensor that is beginning to send inconsistent signals to the main board.

Typical repair cost £0-120 (including labour)

DIY fix possible

Wait up to 15 minutes to see if the boiler restarts automaticallyCheck that your heating controls or room thermostat are turned upRotate the mode selector switch to 'OFF/RESET' and then back to the heating/hot water position

Find a Gas Safe engineer

Search the official register for a qualified engineer in your area.

Gas Safe Register →

Vokera models that show the Green | On every 0.5 second fault code

Click a model for the full fault code list and model-specific repair notes.

Source

Vokera Green | On every 0.5 second fault code information on this page is sourced and cross-checked against the official Vokera service / installation manuals for each affected model.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026