Preheating function running
Vokera Vision Fault codes & diagnostics
17 fault codes with plain-English explanations, severity ratings, DIY guidance, and repair cost estimates.
This boiler uses LED flash patterns
Count the flashes in one repeating group before the pause. That number is your fault code. Do not reset until you have noted it. How to read fault codes →
Severity at a glance
Each cell = one fault code. Hover to identify.Which version do you have?
The GC number on your boiler's data badge identifies the exact appliance and production years, as recorded in the UK Product Characteristics Database.
| GC number | Appliance (register name) | Produced |
|---|---|---|
| 47-364-11 | Vision 30C | 2012–present |
Appliance names and production years are taken from the UK Product Characteristics Database (the SAP/SEDBUK register). Where a GC number is also printed in this model's own manufacturer manual, both sources were checked to agree.
All 17 documented codes
Tap any card for details
CALL FOR SERVICE
AUTOSTOP
Ignition failure, flame not sensed, internal fault
Limit thermostat fault
Fan tacho signal fault
Insufficient system water pressure
DHW thermistor fault
Primary (flow) thermistor fault / Primary (flow) thermistor over temperature / Temperature differential
Return thermistor fault / Return thermistor over temperature / Temperature differential inverted
Flue thermistor or flue thermistor counter fault / Flue thermistor over temperature
Low temperature thermostat fault
Service operation
Calibration
Flame ON
Stand-by
Preheating function active
Avoid the next call-out bill
Monthly cover means no unexpected bills when your boiler breaks down.
Affiliate links. We may earn a commission at no extra cost to you.