What does the Worcester Bosch 1023 fault code mean?

Your boiler has been running for a very long time without a proper break, likely due to a system management setting or a sensor error, and needs a reset to clear the accumulated timer.

How much does it cost to fix Worcester Bosch error code 1023?

Typical repair cost for the Worcester Bosch 1023 fault is £80-120 including labour.

Worcester Bosch 1023 Fault Code: What It Means & How to Fix It

What the manual says

Manufacturer manual

Maximum run time including standby time reached

From this model's manual

Verified against the Worcester Bosch/Worcester Bosch 2000 Gc2000iw 2019 installation & service manual, page 84.

DIY fix possible

Locate the reset button or dial on the boiler front panelPress and hold the reset button for 3 to 5 secondsWait for the boiler to cycle through its startup routineIf the code persists, turn the boiler off at the mains for 10 minutes before turning it back on

Find a Gas Safe engineer

Search the official register →

Boiler cover options

Avoid the next call-out bill

Monthly cover means no unexpected bills when your boiler breaks down.

Approved partner

Domestic Appliance Guard

Unlimited call-outs, 24/7 helpline, no price-hike promise

Get a quote →

Affiliate links. We may earn a commission at no extra cost to you.

All 144 fault codes on the 2000 GC2000iW 25 C NG

Seeing a different code? Every code this model can display, in one place.

200 201 202 203 204 207 208 212 214 215 224 227 228 229 232 233 234 235 237 238 242 244 245 246 247 249 250 251 252 253 254 256 257 258 259 262 263 264 265 268 269 270 273 275 281 305 306 323 328 341 342 350 351 356 357 358 360 362 363 364 365 604 810 815 1013 1014 1017 1018 1021 1022 1065 1068 1073 1074 1075 1076 2051 2085 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2920 2921 2922 2923 2924 2925 2926 2927 2928 2930 2931 2932 2940 2941 2942 2943 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2971 2972 2973 2974 b1 C1 C4 C6 Constant red d1 d3 E2 Flashing red

Your boiler has been running for a very long time without a proper break, likely due to a system management setting or a sensor error, and needs a reset to clear the accumulated timer.

What the manual says

DIY fix possible

Avoid the next call-out bill

All 144 fault codes on the 2000 GC2000iW 25 C NG

Related guides you might find useful

Thermostat not working

Boiler service cost

Boiler keeps cutting out

Recently viewed