Low
P x.x on Atag Q 25CR

Your boiler is simply displaying its current water pressure rather than indicating a fault.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed

Monitor it

This is a minor fault. Keep an eye on it and mention it at your next annual boiler service. Reset the boiler and see if it clears.

What the manual says

Manufacturer manual

Water pressure in bar.

Shared across the Q 25CR range
This code is shared by the boilers in this range, which use the same control board. It may not be printed in this exact variant’s manual.
Plain-English guidance below. Severity, DIY steps, costs and parts are our interpretation to help you act, not text from the manual.

DIY fix possible

Check the pressure gauge on the front display against the manufacturer's recommended range (usually 1.0 to 1.5 bar).If the pressure is within the green zone, no action is required.If it is outside the recommended range, use the external filling loop to adjust the water pressure accordingly.

Find a Gas Safe engineer
Search the official register →
Boiler cover options

Avoid the next call-out bill

A cover plan would handle faults like P x.x: no call-out fees, no surprise bills.

Approved partner
Domestic Appliance Guard
Unlimited call-outs, 24/7 helpline, no price-hike promise
Get a quote →

Affiliate links. We may earn a commission at no extra cost to you.

All 53 fault codes on the Q 25CR

Seeing a different code? Every code this model can display, in one place.

000102040510111218192028405060676980818285A0A1A4A5A9Block 01Block 11Block 12Block 60Block 67Block 80Block 81Block 82Block 85COdEError 00Error 01Error 02Error 04Error 05Error 12Error 18Error 19Error 28Error 69Error 80FILLGoodHIGHStBYSTOP

Related guides you might find useful

What pressure should my boiler be?

1 to 1.5 bar when cold on most UK boilers, from the manuals.

Read →

Boiler keeps losing pressure

Six most common causes of dropping pressure.

Read →

Is boiler cover worth it?

Break-even maths on monthly cover.

Read →