10 fault codes with plain-English explanations, severity ratings, DIY guidance, and repair cost estimates.
Replaced by: Platinum Combi HE A
Pick the one you have. The fault codes, GC numbers and manual differ by type.
The fault code is already on your display
Note it down before pressing reset — resetting clears the code immediately. How to read fault codes →
Tap any card for details
Your boiler has lost track of how hot the water inside the heating system is because a temperature sensor is not working properly.
Your boiler has temporarily stopped working because it has detected a problem with the temperature sensor located in the exhaust flue.
Your boiler is struggling to accurately measure the temperature of your hot water because a sensor is faulty or disconnected.
Your Baxi boiler has automatically shut down because it detected dangerously high internal temperatures.
Your boiler has temporarily stopped working because the water pressure inside the system has dropped too low.
Your boiler has stopped working because water is not flowing properly through the internal pipes to heat your home.
Your boiler has safely shut down because the temperature sensor inside the flue has detected that the exhaust gases are getting too hot.
Your boiler has stopped working because it is not receiving enough gas or the flame has gone out.
Your boiler has detected an issue with the internal fan that safely pushes harmful exhaust gases outside, so it has shut down to protect your home.
Your boiler is temporarily locking out because the water inside is not circulating properly before it attempts to fire up.
BoilerFaultCodes