17 fault codes with plain-English explanations, severity ratings, DIY guidance, and repair cost estimates.
Replaced by: Chaffoteaux PIGMA
The fault code is already on your display
Note it down before pressing reset — resetting clears the code immediately. How to read fault codes →
The GC number on your boiler's data badge identifies the exact appliance and production years, as recorded in the UK Product Characteristics Database.
| GC number | Appliance (register name) | Produced |
|---|---|---|
| 47-980-21 | Centora Green 24 | 2002–2007 |
Appliance names and production years are taken from the UK Product Characteristics Database (the SAP/SEDBUK register). Where a GC number is also printed in this model's own manufacturer manual, both sources were checked to agree.
Tap any card for details
Your boiler has detected that it is running too hot and has automatically shut down to prevent any internal damage.
Your boiler is failing to ignite because it cannot detect a flame, meaning you currently have no heating or hot water.
Your boiler is currently running its pump to prevent the internal water from freezing in cold temperatures, which is a normal safety function.
Your boiler has automatically activated its built-in protection system to prevent your internal pipes from freezing during cold weather.
Your boiler has detected that water is not moving through the system properly, which is preventing it from heating your home safely.
Your boiler has stopped working because the water pressure inside the heating system has dropped too low.
Your boiler has lost the ability to tell how hot your tap water is, so it has safely stopped heating it to prevent overheating.
Your boiler is currently unable to sense the temperature of your hot water properly, which means it has stopped heating it to prevent the system from overheating.
Your boiler has lost the ability to measure the temperature of the water being sent to your radiators, so it has shut down to prevent overheating.
Your boiler's temperature sensor is disconnected or broken, so the system has stopped heating your home because it cannot accurately measure the water temperature.
Your boiler is struggling to ignite the flame it needs to heat your home and is currently trying to restart itself.
Your boiler's internal computer is unable to communicate with its sensors due to a faulty electrical connection or damaged wiring.
Your boiler has detected that the internal fan responsible for clearing exhaust gases is not spinning fast enough, so it has safely shut itself down to prevent any risk.
Your boiler is unable to safely vent exhaust gases because it cannot control the internal fan, so it has shut itself down to prevent a safety hazard.
Your boiler is struggling to switch between heating your radiators and providing hot water to your taps because an internal valve is stuck.
Your boiler's control screen is struggling to talk to the main computer, which prevents the system from starting up or operating correctly.
Your boiler's internal computer is failing to send signals to the main control board, which prevents the unit from starting or operating.
BoilerFaultCodes