17 fault codes with plain-English explanations, severity ratings, DIY guidance, and repair cost estimates.
Replaced by: Chaffoteaux PIGMA
The fault code is already on your display
Note it down before pressing reset — resetting clears the code immediately. How to read fault codes →
The GC number on your boiler's data badge identifies the exact appliance and production years, as recorded in the UK Product Characteristics Database.
| GC number | Appliance (register name) | Produced |
|---|---|---|
| 47-980-21 | Centora Green 24 | 2002–2007 |
Appliance names and production years are taken from the UK Product Characteristics Database (the SAP/SEDBUK register). Where a GC number is also printed in this model's own manufacturer manual, both sources were checked to agree.
Tap any card for details
Your boiler has detected that it is running too hot and has automatically shut down for safety to prevent damage.
Your boiler is failing to light the gas burner, which means it cannot provide heat or hot water.
Your boiler has stopped working because a sensor inside is detecting that the water is overheating or not circulating correctly.
Your boiler has failed to ignite properly and has locked out for safety because it cannot detect a stable flame.
Your boiler has stopped working because water is not moving around the internal system properly, causing it to shut down to prevent overheating.
Your boiler has detected that there is not enough water pressure in the system to operate safely.
Your boiler's hot water sensor has failed, meaning it cannot accurately measure the temperature of the water going to your taps.
Your boiler's hot water sensor has failed, meaning it cannot accurately measure or deliver hot water to your taps.
Your boiler has lost the ability to measure the temperature of the water being sent to your radiators, so it has shut down to prevent overheating.
Your boiler's internal thermometer for the heating system has stopped working, meaning the unit cannot safely tell how hot the water is and has shut down as a precaution.
Your boiler has detected an issue with the water circulation, which has caused it to temporarily stop working to protect itself.
Your boiler has stopped working because of an internal electrical connection issue between its main control components.
Your boiler has stopped working because the internal fan is spinning too slowly to safely clear exhaust gases.
Your boiler has detected a problem with the fan that safely removes exhaust gases, meaning the system has shut down to prevent safety issues.
Your boiler is stuck in heating mode, which means your radiators might stay hot even when you only want hot water, or you may find you have no hot water at all.
Your boiler's main control system is having trouble talking to the front display panel, meaning the boiler cannot receive the instructions it needs to provide heating and hot water.
Your boiler's computer brains aren't talking to each other properly, causing the system to stop working for safety.
BoilerFaultCodes