17 fault codes with plain-English explanations, severity ratings, DIY guidance, and repair cost estimates.
The fault code is already on your display
Note it down before pressing reset — resetting clears the code immediately. How to read fault codes →
The GC number on your boiler's data badge identifies the exact appliance and production years, as recorded in the UK Product Characteristics Database.
| GC number | Appliance (register name) | Produced |
|---|---|---|
| 47-980-24 | Centora Green 30 | 2002–2007 |
Appliance names and production years are taken from the UK Product Characteristics Database (the SAP/SEDBUK register). Where a GC number is also printed in this model's own manufacturer manual, both sources were checked to agree.
Tap any card for details
Your boiler has detected that it is running too hot and has automatically shut itself down to prevent damage.
Your boiler is failing to light the internal flame needed to produce heat or hot water.
Your boiler is currently running its built-in safety mode to prevent the internal water pipes from freezing, which is a normal protective feature during very cold weather.
Your boiler is currently protecting its internal components from freezing by running the pump and heater, which is a normal safety feature during very cold weather.
Your boiler has detected that water is not moving around your heating system properly, meaning it cannot safely generate heat or hot water.
Your boiler has stopped working because the water pressure inside the heating system has dropped too low.
Your boiler has lost the ability to measure the temperature of the hot water it provides, so it has shut down the tap water function to prevent overheating.
Your boiler has lost the ability to monitor the temperature of your hot water, so it has safely shut down to prevent overheating.
Your boiler has lost the ability to read the water temperature, so it has safely shut down to prevent overheating.
Your boiler has lost the ability to measure the temperature of the water being sent to your radiators, so it has shut down to prevent overheating.
Your boiler is struggling to ignite the flame it needs to heat your home and is trying to automatically restart itself.
Your boiler has detected a loose or faulty electrical connection which is preventing it from communicating with its internal controls.
Your boiler is struggling to push air through its system, so it has safely shut itself down to prevent it from running incorrectly.
Your boiler has detected an issue with the internal fan that pushes exhaust gases out of your home, so it has safely shut itself down to prevent operation.
Your boiler is struggling to switch between heating your radiators and heating your hot water because a small internal valve is stuck.
Your boiler's main internal computer and the front control display are having trouble talking to each other, preventing the system from operating correctly.
Your boiler's internal computer is unable to communicate with its control panel, meaning the unit cannot receive instructions to provide heating or hot water.
BoilerFaultCodes