No burner ignition High

Ferroli No burner ignition Fault Code

Also written as NOBURNERIGNITION — same fault.

The Ferroli No burner ignition fault code means: your boiler is not lighting, which means you have no heating or hot water because the system cannot produce a flame.. It appears on 4 Ferroli models in our database.

Call an engineer soon

Book a Gas Safe engineer within 24 to 48 hours. Your boiler may be unsafe or could break down completely if left.

Technical description: Make sure that the gas cocks ahead of the boiler and on the meter are open. Press the RESET button (for 1 second). In case of repeated shutdowns, contact the Ferroli Service.
Typical repair cost £100-350 (including labour)

DIY fix possible

Check that your gas emergency control valve and meter valve are in the 'open' positionPress and hold the RESET button for one second to clear the faultEnsure you have credit on your gas meter if you use a pre-payment system

Find a Gas Safe engineer

Search the official register for a qualified engineer in your area.

Gas Safe Register →

Ferroli models that show the No burner ignition fault code

Click a model for the full fault code list and model-specific repair notes.

Source

Ferroli No burner ignition fault code information on this page is sourced and cross-checked against the official Ferroli service / installation manuals for each affected model.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed 27 April 2026