BoilerFaultCodesWhat the manual says
Manufacturer manualWaiting period: Water deficiency in the circuit (flow/return spread too large)
Shared across the Energy7 range
This code is shared by the boilers in this range, which use the same control board. It may not be printed in this exact variant’s manual.
DIY fix possible
Check your radiator valves to ensure they are fully open.Check your system pressure gauge; if it is low (below 1 bar), use the filling loop to top it up to 1.5 bar.Bleed your radiators to remove any trapped air that might be blocking water flow.
Find a Gas Safe engineer
Search the official register →
Boiler cover options
Avoid the next call-out bill
A cover plan would handle faults like S.54: no call-out fees, no surprise bills.
Approved partner
Get a quote →
Domestic Appliance Guard
Unlimited call-outs, 24/7 helpline, no price-hike promise
Affiliate links. We may earn a commission at no extra cost to you.
Related fault codes
All 79 fault codes on the Energy7 Regular
Seeing a different code? Every code this model can display, in one place.
Connectiond.02d.94F.00F.01F.10F.11F.13F.20F.23F.24F.25F.27F.28F.29F.32F.49F.61F.62F.63F.64F.65F.67F.68F.70F.71F.72F.77F.78F.83F.84F.85F.86F.87F.88F.91F.97P.01P.02P.03P.04P.05P.06P.07P.10S.0S.01S.02S.03S.04S.05S.06S.07S.08S.20S.21S.22S.23S.24S.25S.26S.27S.28S.30S.31S.32S.34S.39S.42S.46S.53S.88S.91S.96S.98S.99S.108S.109
Related guides you might find useful
Hot water works but heating does not
On a combi it is usually the diverter valve. On a system boiler, the motorised valve.
Read →Radiator not heating up
One cold radiator is usually a stuck valve pin or trapped air.
Read →No hot water but heating works
Almost always a stuck diverter valve on a combi.
Read →