BoilerFaultCodesWhat the manual says
Manufacturer manualMaximum DHW temperature reached
From this model's manual
Verified against the Viessmann/Viessmann Vitodens 100 W Wb1a installation & service manual.
DIY fix possible
Check the hot water temperature setting on the boiler's control panel and make sure it is not set higher than you need, typically around 60°C.Turn off the boiler at its on/off switch, wait about 30 seconds, then switch it back on to clear the message.Run a hot tap for a minute to see whether the message clears as the cylinder water is used. If it returns repeatedly, or hot water is not reaching the taps, contact a Gas Safe registered engineer.
Find a Gas Safe engineer
Search the official register →
Boiler cover options
Avoid the next call-out bill
Monthly cover means no unexpected bills when your boiler breaks down.
Approved partner
Get a quote →
Domestic Appliance Guard
Unlimited call-outs, 24/7 helpline, no price-hike promise
Affiliate links. We may earn a commission at no extra cost to you.
Related fault codes
All 170 fault codes on the Vitodens 200-W B2HE-32
Seeing a different code? Every code this model can display, in one place.
F.7F.8F.9F.10F.11F.12F.13F.14F.15F.16F.29F.30F.49F.50F.57F.58F.59F.62F.63F.65F.67F.68F.69F.70F.71F.72F.73F.74F.77F.89F.91F.92F.93F.94F.100F.104F.142F.160F.161F.162F.163F.182F.183F.184F.185F.299F.342F.345F.346F.348F.349F.350F.351F.352F.353F.354F.355F.357F.359F.361F.365F.366F.367F.368F.369F.370F.372F.373F.375F.377F.378F.380F.381F.382F.383F.384F.385F.386F.387F.388F.395F.396F.399F.400F.401F.402F.403F.404F.405F.406F.408F.410F.416F.417F.418F.425F.426F.427F.428F.429F.430F.432F.433F.436F.437F.440F.441F.442F.443F.444F.445F.446F.447F.448F.449F.450F.451F.452F.453F.454F.455F.456F.457F.458F.461F.462F.463F.464F.467F.468F.471F.473F.474F.517F.527F.528F.530F.538F.539F.540F.542F.543F.544F.545F.546F.547F.574F.575F.576F.577F.578F.579F.580F.581F.582F.666F.667F.668F.669F.670F.671F.672F.673F.682F.683F.684I.56I.57I.59