Low Information
71:0 on Viessmann Vitodens 333-F

Your boiler is notifying you that your hot water circulation pump is currently active based on its programmed schedule, which may be an advisory rather than a breakdown.

Reviewed by the BoilerFaultCodes Editorial Team · Last reviewed

Monitor it

This is a minor fault. Keep an eye on it and mention it at your next annual boiler service. Reset the boiler and see if it clears.

Technical description

DHW circulation pump: On according to DHW time program

What causes this fault?

This code is an status indicator rather than a mechanical failure, triggered when the boiler's internal clock activates the secondary hot water pump. It occurs because the system is following a pre-set schedule to ensure instant hot water is available at your taps. If you see this code when you don't need hot water, it usually means the timer settings in the control unit need to be adjusted to match your daily routine.

DIY fix possible

Check your hot water time program settings on the control panelEnsure the pump is not running during hours when it is not needed to save energyReset the boiler to see if the advisory message clears

Find a Gas Safe engineer
Search the official register →

Related fault codes

71:1View →

Related guides you might find useful

No hot water but heating works

Almost always a stuck diverter valve on combis.

Read →

Banging / kettling / whistling noise

Each noise points to a different fault.

Read →

Radiators cold at the bottom

Sludge build-up — needs flushing, not bleeding.

Read →