Ideal Esprit Eco Fault codes & diagnostics

Your boiler has repeatedly shut down and restarted itself five times in a very short period, suggesting it is struggling to function safely or sustain its operation.

Your boiler has detected an issue with the internal identification key that helps it communicate with its control system, causing it to stop operating until the connection is restored.

Your boiler has detected a communication error with its 'Boiler Configuration Card', which is a small memory chip that stores your specific boiler settings.

Your boiler has lost the digital instructions telling it how to function, which prevents it from starting up correctly.

Your boiler's internal memory chip is not communicating correctly with the main computer, preventing the boiler from starting safely.

Your boiler's electronic memory card is not being recognised, which prevents the system from starting up safely.

Your boiler has temporarily stopped working because the water pressure inside the system has dropped too low to operate safely.

Your boiler's flame has unexpectedly gone out while trying to run, which safely shuts down the system.

Your boiler has detected an issue with the internal fan that safely removes combustion gases, causing it to lock out for safety.

Your boiler has stopped working because the water pressure inside the heating system has dropped too low.

Your boiler has detected an issue with the fan that safely clears exhaust gases, preventing it from starting up for your safety.

Your boiler has detected a problem with the sensor that monitors the temperature of the water leaving the unit, meaning it cannot safely regulate heat.

Your boiler has detected a sensor problem that means it cannot accurately measure the temperature of the water returning to the unit, causing it to shut down for safety.

Your boiler has detected that the electrical supply coming into your home is too low for it to operate safely.

Your boiler's main computer control panel is experiencing a software or internal communication error, meaning the boiler has safely shut down to prevent incorrect operation.

Your boiler has detected a problem with its internal fan and has shut down as a safety precaution, meaning you will not have any heating or hot water.

Your boiler has detected that the flame inside has gone out unexpectedly and it cannot stay alight, so it has safely shut itself down to prevent gas from building up.

Your boiler has detected that the water inside the system is getting dangerously hot and has automatically shut down to prevent damage.

Your boiler's temperature sensor is providing faulty readings, causing the system to stop operating as it cannot safely monitor how hot the water is getting.

Your boiler has failed to light the flame, so it has safely shut itself down to prevent a build-up of unburnt gas.

Your boiler has temporarily shut down because the water inside it has become too hot.

Your boiler has failed to light its flame after a few attempts, so it has safely shut itself down to prevent a gas build-up.

Your boiler has temporarily locked itself out for safety after registering too many automatic resets in a short space of time.

Your boiler has mistakenly detected a flame inside when it should be switched off, so it has safely locked itself out to prevent any issues.

Your boiler has tried to start up several times but couldn't successfully light the flame.

Your boiler has stopped working because the water level inside the system has dropped too low and needs topping up.

The computer brain of your boiler has not been told which specific model it is installed in, so it cannot safely start the system.