Vaillant ecoFIT sustain 615 Fault codes & diagnostics

Your boiler's control panel and its internal brain have lost their connection, meaning the unit cannot receive instructions to heat your home or water.

Your boiler has temporarily stopped working because it cannot accurately measure the temperature of the water leaving the system.

Your boiler has temporarily stopped working because it has detected an electrical fault with one of its internal temperature sensors.

Your boiler has temporarily stopped working because it has detected an electrical fault with one of its internal temperature sensors.

Your boiler is struggling to detect the temperature of your hot water due to a wiring issue or a faulty sensor, so it has stopped heating to prevent potential damage.

Your boiler has temporarily shut down because the internal water temperature got too high.

Your boiler has automatically shut down because the internal water pressure has dropped too low to run safely.

Your boiler has shut down because there is a dangerous difference in temperature between its internal sensors, usually caused by a restriction in water flow.

Your boiler is temporarily shutting down because the water inside is heating up much faster than normal, usually due to poor water flow.

Your boiler is failing to light the flame needed to produce heat or hot water.

Your boiler is failing to stay lit, which means it has safely shut itself down because it cannot consistently produce or hold a flame.

Your boiler has detected that the fan, which pushes waste gases outside, isn't spinning at the correct speed to ensure safe operation.

Your boiler's communication system is experiencing a power supply issue, causing it to lose its ability to talk to your thermostat or internal components.

Your boiler has detected an issue with the internal safety mechanism that controls the gas flow, so it has safely shut itself down to prevent operation.

Your boiler's internal computer has encountered a memory error and cannot read the essential configuration data required to operate safely.

Your boiler's main computer control panel is failing to process signals from its sensors, meaning it cannot safely operate the system.

Your boiler has detected that its internal control brain is overheating and has shut itself down to prevent damage.

Your boiler's computer is struggling to safely detect or manage the flame, so it has shut itself down to prevent any unsafe operation.

Your boiler is struggling to keep a steady flame, causing it to shut down for safety reasons.

Your boiler has lost its unique digital identity, meaning the internal computer no longer knows how to correctly control your specific heating system.

Your boiler is struggling to accurately measure the temperature of the water flowing through the system, so it has safely shut itself down to prevent overheating.

Your boiler is having trouble reading the water pressure or temperature accurately, which has caused it to switch itself off for safety.

Your boiler's internal water pressure gauge is failing to signal correctly, meaning the system cannot confirm it has enough water to operate safely.

Your boiler is struggling to accurately measure its own internal water pressure, so it has stopped working to prevent potential damage to the system.

Your boiler is struggling to detect the water pressure inside the system, which prevents it from firing up safely.

Your boiler has detected an issue with how it clears water or exhaust gases, meaning it has switched itself off to stay safe.

Your boiler has detected that there is not enough water circulating inside the system to carry the heat away safely.

Your boiler is struggling to compare the temperature of the water leaving and returning, meaning it cannot safely control its heating output.

Your boiler is struggling to read its own internal water temperature correctly, so it has stopped working to prevent potential damage.

Your boiler is having trouble detecting or maintaining the flame safely, so it has shut down to prevent any issues.

Your boiler is struggling because the internal pump that moves hot water through your home's radiators and taps has stopped working correctly.

Your boiler's internal computer has failed its safety check and has shut down to protect your home.