What does the Vaillant P.01 fault code mean?

Your boiler has failed while running a specific test used for commissioning or high-power performance checks.

How much does it cost to fix Vaillant error code P.01?

Typical repair cost for the Vaillant P.01 fault is £80-160 including labour.

Vaillant P.01 Fault Code: What It Means & How to Fix It

What the manual says

Manufacturer manual

Maximum load test program error

Shared across the range

This code is shared by the boilers in this range, which use the same control board. It may not be printed in this exact variant’s manual.

What causes this fault?

This fault occurs when the boiler's internal diagnostic program fails to complete its high-performance test correctly. It is usually triggered manually by an engineer during a service or installation, and the error suggests that the system couldn't maintain the required heat output to finish the check. The most common reason is a sensor reading an unexpected temperature or the test being interrupted before the sequence was finished.

DIY fix possible

Turn the boiler power off at the wall or fused spurWait 60 secondsTurn the power back on and press the 'Reset' button (indicated by a flame with a line through it)

Find a Gas Safe engineer

Search the official register →

Boiler cover options

Avoid the next call-out bill

A cover plan would handle faults like P.01: no call-out fees, no surprise bills.

Approved partner

Domestic Appliance Guard

Unlimited call-outs, 24/7 helpline, no price-hike promise

Get a quote →

Affiliate links. We may earn a commission at no extra cost to you.

Related fault codes

P.00View →P.02View →P.06View →

All 170 fault codes on the ecoTEC Plus 620

Seeing a different code? Every code this model can display, in one place.

con d.00 D.000 d.01 d.02 d.04 d.05 d.06 d.07 d.08 d.09 d.10 d.11 d.13 d.14 d.15 d.16 d.17 d.18 d.19 d.20 d.21 d.22 d.23 d.24 d.25 d.27 d.28 d.31 d.33 d.34 d.35 d.36 d.39 d.40 d.41 d.43 d.45 d.47 d.50 d.51 d.58 d.60 d.61 d.62 d.64 d.65 d.66 d.67 d.68 d.69 d.70 F.00 F.0 F.01 F.1 F.10 F.11 F.12 F.13 F.20 F.22 F.23 F.24 F.25 F.27 F.28 F.29 F.32 F.33 F.49 F.61 F.62 F.63 F.64 F.65 F.67 F.68 F.70 F.71 F.72 F.73 F.74 F.75 F.76 F.77 F.78 F.83 F.84 F.85 F.86 F.87 F.88 F.89 F.91 F.92 F.97 F22 F70 P.00 P.0 P.1 P.02 P.2 P.3 P.4 P.5 P.06 P.6 P.07 S.0 S.01 S.1 S.02 S.2 S.03 S.3 S.04 S.4 S.05 S.5 S.06 S.6 S.07 S.7 S.08 S.8 S.10 S.11 S.13 S.14 S.15 S.16 S.17 S.20 S.21 S.22 S.23 S.24 S.25 S.26 S.27 S.28 S.30 S.31 S.32 S.33 S.34 S.36 S.39 S.41 S.42 S.46 S.53 S.54 S.88 S.91 S.96 S.97 S.98 S.99 S.108 S.109 T.02 T.03 T.04 T.05 T.06 T.08

Your boiler has failed while running a specific test used for commissioning or high-power performance checks.

What the manual says

What causes this fault?

DIY fix possible

Avoid the next call-out bill

Related fault codes

All 170 fault codes on the ecoTEC Plus 620

Related guides you might find useful

Boiler won't turn on — 9-step checklist

Boiler keeps cutting out

Yellow or orange flame — CO safety

Recently viewed