What the manual says
Manufacturer manualCommunication error, remote control Vitotrol heating circuit 1 (without mixer)
DIY fix possible
Check that the room controller (Vitotrol) display is switched on and, if it is battery-powered, replace the batteries.Make sure the controller's cable or wireless connection is secure, then switch the boiler off at its isolator or fused spur for 30 seconds and back on.Wait about 10 minutes, then check whether the code has cleared. If it returns, call a Gas Safe registered engineer and do not open the boiler casing yourself.
Avoid the next call-out bill
A cover plan would handle faults like bC: no call-out fees, no surprise bills.
Affiliate links. We may earn a commission at no extra cost to you.
Related fault codes
All 83 fault codes on the Vitodens 200-W B2KA-30
Seeing a different code? Every code this model can display, in one place.