BoilerFaultCodesWhat the manual says
Manufacturer manualBleeding test program. The heating circuit and hot water circuit (when accessories are fitted) is bled via the automatic air vent (the cap on the automatic air vent must be loosened).
What causes this fault?
This code appears when the boiler detects or suspects that air is trapped inside the internal pipework or heat exchanger. It is often triggered automatically after the system has been drained for a repair or when the water pressure has recently been topped up. The boiler runs this program to safely push those air bubbles out through an internal valve to prevent noisy operation or overheating.
This is more common in autumn when homeowners top up their system pressure or bleed their radiators for the first time before turning the heating on for winter.
DIY fix possible
Wait for the program to finish, which usually takes about 6.5 minutes.Ensure the small screw cap on the internal automatic air vent is slightly loosened.Check your boiler pressure gauge and top it up if it has dropped during the process.
Avoid the next call-out bill
Monthly cover means no unexpected bills when your boiler breaks down.
Affiliate links. We may earn a commission at no extra cost to you.